Does Hydro Jet Drain Cleaning Make A Big Mess?

Become Back

Why Hydro-Jetting?

Picture this…

You take a complete sewer line full of grease, sludge, crud, gunk, and droppings that have built up over years of employ. When a drain clog occurs and your fixtures (such every bit toilets, sinks, and tubs) begin to back up or agree water, the starting time arroyo is generally to utilise a drain serpent or rooter to articulate the clog.

The rooter then acts as a prod and punctures holes through this build-up in order to clear a passageway for drain water. This will solve your immediate problem and your drain lines will brainstorm to menstruum again, just the question is: FOR HOW LONG? Sometimes this remedy will last a day or two, sometimes a few months, just never too long. That's where hydro-jetting (aka hydro-scrubbing) comes into play!

WHAT IS HYDRO-JETTING?

Hydro-jetting is a process that utilizes a high-force per unit area water stream, shooting out of a hose at a force per unit area of upwards to iii,500 psi, in order to cut through any and all of the sludge and gunk (and even stubborn tree roots and mineral build-up) that is clogging your bleed. It is typically done through a special opening called a cleanout (located on the outside of most homes), which allows your plumber easier admission to clean out your drain lines. (If y'all do not take a cleanout, it is definitely recommended that you go one installed commencement.)

So WHAT'S THE DIFFERENCE BETWEEN SNAKING & HYDRO-JETTING?

Well, it's often easier to depict past manner of a pic, and then below is a simple diagram case of the differences between snaking a drain and hydro scrubbing a drain.

And then WHEN IS HYDRO-JETTING RECOMMENDED?

Hyrdo-jetting is mostly recommended every bit a solution when clogs cannot be removed through the traditional snaking or rooter methods, mostly due to high grease/sludge content or root intrusion in your bleed pipes. A plumber tin let you lot know the corporeality of resistance or how stubborn a clog is to remove and from at that place, they volition mostly recommend hydro-jetting if they think information technology is necessary.

So, if your plumber recommends hydro-jetting, your best bet (for lots of time and coin savings due to repeat clogging) is to go for information technology! Hydro-jetting (so long as there is not any serious root intrusion which is explained below), will help bring your sewer pipes back to a "like-new" condition and save you lot from the headaches and pocketbook aches of having to call a plumber for repeat clogs! So what are you waiting for? Don't exist empty-headed, get your drain lines hydro-scrubbed today!

A Large SIDE Notation ABOUT ROOT INTRUSION AND HYDRO-JETTING

One matter to proceed in mind, although hydro-jetting is great at clearing stubborn roots from within your drain lines, root intrusion that is invasive enough to cause repeat backups is a clear sign for much more than serious concern. Repeat stoppages caused past root penetration in your drain lines generally mean that the roots take gotten thicker and have contradistinct your pipelining, which is a off-white warning for larger pipe damage in the most hereafter.

With this, a plumber will mostly recommend a sewer camera inspection in guild to locate and make up one's mind the severity of the result. In serious cases, a plumber may recommend either partial or complete sewer pipage replacement, in order to avoid pipe breakages or pipe bursts that can crusade a much larger mess and cost much more to make clean upwards.